Command:

x25 wout


Mode
:

Router(config-if)#


Syntax:

x25 wout packets


Syntax Description:
packets 

Packet count that can range from 1 to one less than the window modulus.

 

Command Description:

To change the default outgoing window size to match that of the network, use the x25 wout interface configuration command.

This command determines the default number of packets a virtual circuit can send before waiting for an X.25 acknowledgment. To maintain high bandwidth utilization, assign this limit the largest number that the network allows.

Set x25 win and x25 wout to the same value unless your network supports asymmetric input and output window sizes.


Example:

The following example specifies a default limit of 5 for the number of outstanding unacknowledged packets for virtual circuits:

Router(config)#interface serial 1
Router(config-if)#x25 wout 5


Misconceptions:

None


Related commands:

x25 modulo

x25 win


� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)