Command:

x25 modulo

Mode:

Router(config-if)#


Syntax:

x25 modulo modulus


Syntax Description:
modulus 

Either 8 or 128. The value of the modulo parameter must agree with that of the device on the other end of the X.25 link.


Command Description:

To set the window modulus, use the x25 modulo interface configuration command.

Usage Guidelines

X.25 supports flow control with a sliding window sequence count. The window counter restarts at zero upon reaching the upper limit, which is called the window modulus. Modulo 128 operation is also referred to as extended packet sequence numbering, which allows larger packet windows.


Example:

The following example sets the window modulus to 128:

Router(config)#interface serial 0
Router(config-if)#x25 modulo 128

Misconceptions:
None

Related commands:
x25 win
x25 wout

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)