no vtp pruning
This command has no arguments or keywords.
Use the vtp pruning VLAN database command to enable pruning in the VLAN Trunk Protocol (VTP) administrative domain. Use the no form of this command to disable pruning.
If you enable pruning on the VTP server, it is enabled for the entire management domain.
Only VLANs included in the pruning-eligible list can be pruned.
VLANs 2 through 1001 are pruning-eligible on 2900 XL and 3500 XL trunk ports.
Pruning is supported with VTP version 1 and version 2.
The following example shows how to enable pruning in the proposed new VLAN database:Switch(vlan)# vtp pruningYou can verify the previous commands by entering the show vtp status command in privileged EXEC mode.
|switchport trunk pruning|
� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education
|Converted from CHM to HTML with chm2web Pro 2.85 (unicode)|