set spantree portpri
set spantree portpri mod/port priority [mst]
Variable that specifies the number of the module and the port on the module.
Variable that specifies the number that represents the cost of a link in a spanning tree bridge; valid values are from 0 (high priority) to 63 (low priority).
(Optional) Keyword that sets the bridge priority for an MST port.
Use the set spantree portpri command to set the bridge priority for a spanning tree port.
This example shows how to set the priority of port 1 on module 4 to 63:Console> (enable) set spantree portpri 4/1 63 Bridge port 4/1 priority set to 63. Console> (enable)
This command is not supported by the NAM.
� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education
|Converted from CHM to HTML with chm2web Pro 2.85 (unicode)|