Command:

set prompt

Mode:

Switch> (enable)


Syntax:

set prompt prompt_string


Syntax Description:

prompt_string

String to use as the command prompt.

 


Command Description:

Use the set prompt command to change the prompt for the CLI.

If you use the set system name command to assign a name to the switch, the switch name is used as the prompt string. However, if you specify a different prompt string later, using the set prompt command, that new string is used as the prompt.

 


Example:

This example shows how to set the prompt to system100>:

Console> (enable) set prompt system100>

system100> (enable)

 


Misconceptions:
None

Related Commands:
set system name

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)