Command:

set port name

Mode:

Switch> (enable)


Syntax:

set port name mod_num/port_num [port_name]


Syntax Description:

mod_num

Variable that specifies the number of the module.

port_num

Variable that specifies the number of the port.

port_name

(Optional) Variable that specifies the name of the port.

 


Command Description:

Use the set port name command to configure a name for a port.

If you do not specify the name string, the port name is cleared.

 


Example:

This example shows how to set port 1 on module 4 to Snowy:

Console> (enable) set port name 4/1 Snowy
Port 4/1 name set.
Console> (enable) 

 


Misconceptions:
None

Related Commands:

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)