Command:

set port duplex

Mode:

Switch> (enable)


Syntax:

set port duplex mod_num/port_num {full | half}


Syntax Description:

mod_num

Variable that specifies the number of the module.

port_num

Variable that specifies the number of the port.

full

Keyword that specifies full-duplex transmission.

half

Keyword that specifies half-duplex transmission.

 


Command Description:

Use the set port duplex command to configure the duplex type of an Ethernet or Fast Ethernet port or range of ports.

You can configure Ethernet and Fast Ethernet interfaces to either full duplex or half duplex.

The set port duplex command is not supported on Token Ring ports.

You cannot configure the duplex mode on Gigabit Ethernet ports (they are always in full-duplex mode).

 


Example:

This example shows how to set port 1 on module 2 to full duplex:

Console> (enable) set port duplex 2/1 full
Port 2/1 set to full-duplex.
Console> (enable)
 

This example shows how to set port 1 on module 2 to half duplex:

Console> (enable) set port duplex 2/1 half
Port 2/1 set to half-duplex.
Console> (enable)

 


Misconceptions:
None

Related Commands:
set port speed
set port membership

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)