Command:

set logout

Mode:

Switch> (enable)


Syntax:

set logout timeout


Syntax Description:

timeout

Variable that specifies the number of minutes until the system disconnects an idle session automatically. Valid values are from 0 to 10000. Setting the value to 0 disables the automatic disconnection of idle sessions.

 


Command Description:

Use the set logout command to specify the number of minutes the system waits before automatically disconnecting an idle session. The default value is 20 minutes.


Example:

This example shows how to set the number of minutes until the system disconnects an idle session automatically:

Console> (enable) set logout 20

Sessions will be automatically logged out after 20 minutes of idle time.
Console> (enable)
 

This example shows how to disable the automatic disconnection of idle sessions:

Console> (enable) set logout 0

Sessions will not be automatically logged out.
Console> (enable)

 


Misconceptions:
None
 


Related Commands:

 

None


� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)