This command has no arguments or keywords.
Use the set enablepass command to change the privileged (enable) mode password on the switch.
Passwords are case sensitive; they may be 0 to 30 characters in length, including spaces.
The command prompts you for the old password. If the password you enter is valid, you are prompted to enter a new password and to verify the new password.
This example shows how to establish a new password:Console> (enable) set enablepass Enter old password: <old_password> Enter new password: <new_password> Retype new password: <new_password> Password changed. Console> (enable)
� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education
|Converted from CHM to HTML with chm2web Pro 2.85 (unicode)|