router igrp autonomous-system
no router igrp autonomous-system
Autonomous system number that identifies the routes to the other IGRP routers. It is also used to tag the routing information.
To configure the Interior Gateway Routing Protocol (IGRP) routing process, use the router igrp global configuration command. To shut down an IGRP routing process, use the no form of this command.
It is not necessary to have a registered autonomous system number to use IGRP. If you do not have a registered number, you are free to create your own. We recommend that if you do have a registered number, you use it to identify the IGRP process.
The following example configures an IGRP routing process and assign process number 109:Router(config)#router igrp 109
|network (RIP, RIPv2, and IGRP)|
� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education
|Converted from CHM to HTML with chm2web Pro 2.85 (unicode)|