no modem inout
This command has no arguments or keywords.
To configure a line for both incoming and outgoing calls, use the modem inout line configuration command. Use the no form of this command to disable the line. This command uses DSR and RING signals for carrier detection. The Cisco IOS software does not support any dialing protocols. The host system software or the user must provide any special dialing commands when using the modem for outgoing calls.
The following example illustrates how to configure a line for both incoming and outgoing calls:Router(config-line)#modem inout
� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education
|Converted from CHM to HTML with chm2web Pro 2.85 (unicode)|