ignore lsa mospf




ignore lsa mospf
no ignore lsa mospf


Syntax Description:

This command has no arguments or keywords.


Command Description:

To suppress the sending of syslog messages when the router receives link-state advertisement (LSA) Type 6 Multicast OSPF (MOSPF) packets, which are unsupported, use the ignore lsa mospf command in router configuration mode. To restore the sending of syslog messages, use the no form of this command.

This command is disabled by default. Each MOSPF packet causes the router to send a syslog message.

Cisco routers do not support LSA Type 6 MOSPF packets, and they generate syslog messages if they receive such packets. If the router is receiving many MOSPF packets, you might want to configure the router to ignore the packets and thus prevent a large number of syslog messages.


The following example configures the router to suppress the sending of syslog messages when it receives MOSPF packets:

Router(config)# router ospf 109
Router(config-router)# ignore lsa mospf



Related Commands:


� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)