debug confmodem




debug confmodem

no debug confmodem

Syntax Description:

This command has no arguments or keywords.

Command Description:

To display information associated with the discovery and configuration of the modem attached to the router, use the debug confmodem privileged EXEC command. The no form of this command disables debugging output.

Usage Guidelines:

The debug confmodem command is used in debugging configurations that use the modem autoconfig command.


The following is a sample of debug confmodem output. In the first three lines, the router is searching for a speed at which it can communicate with the modem. The remaining lines show the actual sending of the modem command.

Router#debug confmodem

TTY4:detection speed(115200) response ------
TTY4:detection speed(57600) response ------
TTY4:detection speed(38400) response ---OK---
TTY4:Modem command: --AT&F&C1&D2S180=3S190=1S0=1--
TTY4: Modem configuration succeeded
TTY4: Done with modem configuration



Related Commands:
modem autoconfigure type
modem autoconfigure discovery
debug all

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)