Creates an extended partition on the disk with focus.

For examples of how this command can be used, see Examples.

Syntax

create partition extended [size=<n>] [offset=<n>] [align=<n>] [noerr]

Parameters

Parameter Description

size=<n>

The size of the partition in megabytes (MB). If no size is given, the partition continues until there is no more free space in the region.

offset=<n>

Applies to master boot record (MBR) disks only. The offset in kilobytes (KB), at which the partition is created. If no offset is given, the partition will start at the beginning of the largest disk extent that is free.

align=<n>

Typically used with hardware RAID Logical Unit Number (LUN) arrays to improve performance. Aligns all volume or partition extents to the closest alignment boundary. n is the number of kilobytes (KB) from the beginning of the disk to the closest alignment boundary.

noerr

For scripting only. When an error is encountered, DiskPart continues to process commands as if the error did not occur. Without this parameter, an error causes DiskPart to exit with an error code.

Remarks

  • After the partition has been created, the focus automatically shifts to the new partition.

  • Only one extended partition can be created per disk.

  • This command fails if you attempt to create an extended partition within another extended partition.

  • You must create an extended partition before you can create logical drives.

  • A basic MBR disk must be selected for this operation to succeed. Use the select disk command to select a disk and shift the focus to it.

Examples

To create an extended partition of 1000 megabytes in size, type:

create partition extended size=1000

Additional references


Converted from CHM to HTML with chm2web Pro 2.85 (unicode)