Command:  

traffic-shape adaptive


Mode:

Router(config-if)#


Syntax:

traffic-shape adaptive bit-rate

 

no traffic-shape adaptive

 

Syntax Description:

bit-rate

Lowest bit rate that traffic is shaped to, in bits per second. The default bit ratevalue is 0.

 

Command Description:

To configure a Frame Relay subinterface to estimate the available bandwidth when backward explicit congestion notification (BECN) signals are received, use the traffic-shape adaptiveinterface configuration command in interface configuration mode. To disregard the BECN signals and not estimate the available bandwidth, use the noform of this command.


Example:

The following example configures traffic shaping on serial interface 0.1 with an upper limit of 128 kbps and a lower limit of 64 kbps. This configuration allows the link to run from 64 to 128 kbps, depending on the congestion level.

interface serial 0

 encapsulation-frame-relay

interface serial 0.1

 traffic-shape rate 128000

 traffic-shape adaptive 64000

 traffic-shape fecn-adapt

 

Misconceptions:

None


Related commands:

 

traffic-shape rate

traffic-shape fecn-adapt


© Cisco Systems, Inc. 2001, 2002
World Wide Education





Converted from CHM to HTML with chm2web Pro 2.85 (unicode)