Command:

timers active-time


Mode:

Router(config-router)#


Syntax:

timers active-time [time-limit | disabled]
no timers active-time

 

Syntax Description:

time-limit EIGRP active-time limit (in minutes). The time range is from 1to 4294967295 minutes.
disabled Disables the timers and permits the routing wait time to remain active indefinitely.

 

Command Description:

To adjust routing wait time, use the timers active-time command in router configuration mode. To disable this function, use the no form of the command.

In EIGRP, there are timers that control the time the router waits (after sending a query) before declaring the route to be in the stuck in active (SIA) state.


Example:

In the following example, the routing wait time is 200 minutes on the specified route:

Router(config)#router igrp 5
Router(config-router)#timers active-time 200
 

In the following example, the routing wait time is indefinite on the specified route:

Router(config)#router igrp 5
Router(config-router)# timers active-time disabled


Misconceptions:

None


Related Commands:

show ip eigrp topology

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)