Command:

snmp-server contact


Mode:

Router(config)#


Syntax:

snmp-server contact text

no snmp-server contact

Syntax Description:

text

String that describes the system contact information.

Defaults

No system contact string is set.

 

Command Description:

 

To set the system contact (sysContact) string, use the snmp-server contact global configuration command. To remove the system contact information, use the no form of this command.


Example:

The following is an example of a system contact string:

Router(config)# snmp-server contact Dial System Operator at beeper # 27345


Misconceptions:

           None.


Related Commands:

snmp-server location

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)