Command:

snapshot server


Mode:

Router(config-if)#


Syntax:

snapshot server active-time [dialer]

no snapshot server active-time [dialer]

 

Syntax Description:

active-time Amount of time, in minutes, that routing updates are regularly exchanged between the client and server routers. This can be an integer in the range 5 to 100. There is no default value. A typical value is 5 minutes.
dialer (Optional) Allows the client router to dial up the remote router in the absence of regular traffic.

 

Command Description:

To configure a server router for snapshot routing, use the snapshot server interface configuration command. To disable a server router, use the no form of this command.


Example:

The following example configures a server router for snapshot routing:

        Router(config)#interface serial 0
        Router(config-if)#snapshot server 5


Misconceptions:

None.


Related Commands:

snapshot client


© Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)