Command:

show vtp domain

Mode:

Switch> (enable)


Syntax:

show vtp domain


Syntax Description:

This command has no arguments or keywords.


Command Description:

Use the show vtp domain command to display VLAN Trunk Protocol (VTP) domain information.


Example:

This example shows how to display VTP domain information:

Console> show vtp domain

Domain Name                      Domain Index VTP Version Local Mode  Password
-------------------------------- ------------ ----------- ----------- ----------
                                 1            2           server      -

Vlan-count Max-vlan-storage Config Revision Notifications
---------- ---------------- --------------- -------------
15         1023             5               disabled

Last Updater    V2 Mode Pruning  PruneEligible on Vlans
--------------- ------- -------- -------------------------
172.20.44.30    enabled disabled 2-1000
Console>
 

The table below describes the fields in the show vtp domain command output.

Table: show vtp domain Command Output Fields

Field Description

Domain Name

Name of the VTP domain

Domain Index

Domain index number of the domain

VTP Version

VTP version number

Local Mode

VTP mode (server, client, or transparent)

Password

Password required or not

Vlan-count

Total number of VLANs in the domain

Max-vlan-storage

Maximum number of VLANs allowed on the device

Config Revision

VTP revision number used to exchange VLAN information

Notifications

Notifications to SNMP (enabled or disabled)

Last Updater

IP address through which VTP was last updated

V2 Mode

Status of VTP V2 mode is enabled or disabled

Pruning

Status of VTP pruning is enabled or disabled

PruneEligible on Vlans

VLANs on which pruning is allowed


Misconceptions:
None

Related commands:
set vtp

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)