Command:

show vlan (IOS)

Mode:

Switch#


Syntax:

show vlan [vlan]


Syntax Description:

vlan

Number from 1 to 1005.


Command Description:

Use the show vlan privileged Exec command to display the settings of VLAN configuration parameters.

If you do not specify vlan, the system displays all VLAN configuration parameters. This command is not functional when bridge groups are enabled.


Example:

This example shows how to display the settings of the VLAN configuration parameters:

hostname#show vlan

VLAN NameStatusPorts
---- -------------------------------- --------- ----------------------------
1    defaultactive1-15
2    VLAN0002                                active16-18
3    VLAN0003                                active
4    VLAN0004active
5    VLAN0005active
6    VLAN0006active
7    VLAN0007active
8    VLAN0008active
9    VLAN0009active
10   VLAN0010active
11   VLAN0011active
12   VLAN0012active
13   VLAN0013active
14   VLAN0014active
15   VLAN0015active
1002 fddi-defaultsuspended
1003 token-ring-defaultsuspended
1004 fddinet-defaultsuspended
1005 trnet-defaultsuspended

VLANTypeSAIDMTUParentRingNoBridgeNoStpTrans1Trans2
------------------------------------------------------
1enet1000011500000IEEE10021003
2enet1000021500000IEEE00
3enet1000031500000
4enet1000041500-000
5enet1000051500-000
6enet1000061500-000
7enet1000071500-000
8enet1000081500-0---00
9enet1000091500-0-- -00
10enet1000101500-0---00
11enet1000111500-0---00
12enet1000121500-0---00
13enet1000131500-0---00
14enet1000141500-000
15enet1000151500000
1002FDDI1010021500000IEEE11003
1003Token_Ring1010031500100510IEEE111002
1004FDDI_Net1010041500001IEEE00
1005Token_Ring_Net1010051500001IEEE00


Misconceptions:

None

Related commands:
spantree

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)