Command:

show tech-support


Mode:

Router#


Syntax:

show tech-support [page] [password]

 

Syntax Description:

page (Optional) Causes the output to display a page of information at a time. Use the Return key to display the next line of output or use the space bar to display the next page of information. If not used, the output scrolls (that is, does not stop for page breaks).
password (Optional) Leaves passwords and other security information in the output. If not used, passwords and other security-sensitive information in the output are replaced with the label "" (this is the default).

 

Command Description:

To display general information about the router when it reports a problem, use the show tech-support privileged EXEC command.

The show tech-support command is useful for collecting a large amount of information about your routing device for troubleshooting purposes. The output of this command can be provided to technical support representatives when reporting a problem.

The show tech-support command displays the output of a number of show commands at once. The output from this command will vary depending on your platform and configuration. For example, access servers will display voice-related show output. Additionally, the show protocol traffic commands will be displayed for only the protocols enabled on your device. The output of the show tech-support command can include the output of the following commands:

show apollo traffic

show appletalk traffic

show bootflash

show bootvar

show buffers

show clns traffic

show context

show controllers

show decnet traffic

show interfaces

show ip traffic

show novell traffic

show processes cpu

show processes memory

show running-config

show stacks

show version

show vines traffic

show xns traffic


Example:

For a sample display of the output of the show tech-support command, refer to the documentation for the show commands listed.


Misconceptions:

None.


Related Commands:

show apollo traffic

show appletalk traffic

show bootflash

show bootvar

show buffers

show clns traffic

show context

show controllers

show decnet traffic

show interfaces

show ip traffic

show novell traffic

show processes cpu

show processes memory

show running-config

show stacks

show version

show vines traffic

show xns traffic


© Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)