This command has no arguments or keywords.
To display information about open local-area transport (LAT), Telnet, or rlogin connections, use the show sessions command in EXEC mode.
This command displays the host name, address, number of unread bytes for the user to receive, idle time, and connection name.
The following is sample output from the show sessions command:
Router# show sessions
Conn Host Address Byte Idle Conn Name
1 MATHOM 192.168.7.21 0 0 MATHOM
* 2 CHAFF 172.25.12.19 0 0 CHAFF
The asterisk (*) indicates the current terminal session.
Table 100 describes significant fields shown in the display.
Table 100 show sessions Field Descriptions
Name or address of the remote host to which the connection is made.
Remote host to which the router is connected through a Telnet session.
IP address of the remote host.
Number of unread bytes displayed for the user to receive.
Interval (in minutes) since data was last sent on the line.
Assigned name of the connection.
� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education
|Converted from CHM to HTML with chm2web Pro 2.85 (unicode)|