Command:

show route-map ipc


Mode:

Router>


Syntax:

show route-map ipc

 

Syntax Description:

This command has no arguments or keywords.

 

Command Description:

To display counts of the one-way route map interprocess communication (IPC) messages sent from the rendezvous point (RP) to the Versatile Interface Processor (VIP) when NetFlow policy routing is configured, use the show route-map ipc command in EXEC mode.

This command displays the counts of one-way route map IPC messages from the RP to the VIP when NetFlow policy routing is configured. If you execute this command on the RP, the messages are shown as "Sent." If you execute this command on the VIP console, the IPC messages are shown as "Received."


Example:

The following is sample output from the show route-map ipc command when it is executed on the RP:

Router#show route-map ipc
Route-map RP IPC Config Updates Sent
Name: 4
Match access-list: 2
Match length: 0
Set precedence: 1
Set tos: 0
Set nexthop: 4
Set interface: 0
Set default nexthop: 0
Set default interface: 1
Clean all: 2


The following is sample output from the show route-map ipc command when it is executed on the VIP:
VIP-Slot0#show route-map ipc Route-map LC IPC Config Updates Received Name: 4 Match access-list: 2 Match length: 0 Set precedence: 1 Set tos: 0 Set nexthop: 4 Set interface: 0 Set default nexthop: 0 Set default interface: 1 Clean all: 2


Misconceptions:

None.


Related Commands:

       

set ip next-hop verify-availability


© Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)