Command:  

show ppp multilink


Mode:

Router>


Syntax:

show ppp multilink [ bundle-interface ]


Syntax Description:

bundle-interface

(Optional) The name of a bundle interface. Enter the name of a bundle interface to display information for only that bundle.

 

Command Description:

To display bundle information for the Multilink PPP (MLP) bundles, use the show ppp multilinkcommand in EXEC mode.


Example:

Router# show ppp multilink

No active bundles

The following is sample output when a single MLP bundle (named bundle1) is on a system:

Router# show ppp multilink

Bundle bundle1, 3 members, first link is BRI0: B-channel 1

0 lost fragments, 8 reordered, 0 unassigned, sequence 0x1E/0x1E rcvd/sent

The following is sample output when two active bundles are on a system. Subsequent bundles would be displayed below the previous bundle.

Router# show ppp multilink

Bundle bundle1, 3 members, first link is BRI0: B-Channel 1

0 lost fragments, 8 reordered, 0 unassigned, sequence 0x1E/0x1E rcvd/sent

Bundle bundle2, 4 members, first link is BRI2: B-Channel 1

0 lost fragments, 28 reordered, 0 unassigned, sequence 0x12E/0x12E rcvd/sent

The following example shows output when a stack group has been created. On stack group member systema, The MLP bundle named bundle1 has bundle interface Virtual-Access4. Two child interfaces are joined to this bundle interface. The first is a local PRI channel (serial 0:4), and the second is an interface from stack group member systemb.

Router# show ppp multilink

Bundle bundle1 2 members, Master link is Virtual-Access4

0 lost fragments, 0 reordered, 0 unassigned, 100/255 load

0 discarded, 0 lost received, sequence 40/66 rcvd/sent

members 2

Serial0:4

systemb:Virtual-Access6 (10.1.1.1)

The following is sample output when the PPP Bandwidth Allocation Control Protocol (BACP) is enabled for the multilink bundle:

Router# show ppp multilink

Bundle bundle1, 1 member, Master link is Virtual-Access1

Bundle under BAP control

Dialer Interface is Dialer1

0 lost fragments, 0 reordered, 0 unassigned, sequence 0x0/0x0 rcvd/sent

0 discarded, 0 lost received, 1/255

Member links: 1

BRI0:1

Discriminators Local Remote

BRI0:1 24 1

 

Misconceptions:

None


Related commands:

 

ppp multilink


© Cisco Systems, Inc. 2001, 2002
World Wide Education






Converted from CHM to HTML with chm2web Pro 2.85 (unicode)