Command:  

show isis routes


Mode:

Router#


Syntax:

show isis area-tag routes


Syntax Description:

area-tag

Required for multiarea IS-IS configuration. Optional for conventional IS-IS configuration.

Meaningful name for a routing process. This name must be unique among all IP or Connectionless Network Service (CLNS) router processes for a given router. If an area tag is not specified, a null tag is assumed and the process is referenced with a null tag. If an area tag is specified, output is limited to the specified area.

 

Command Description:

To display the Intermediate System-to-Intermediate System (IS-IS) Level 1 forwarding table for IS-IS learned routes, use the show isis routescommand in EXEC mode.


Example:

The following is sample output from the show isis routescommand:

Router# show isis routes

IS-IS Level-1 Routing Table - Version 34

System Id       Next-Hop        SNPA            Interface    Metric    State

0000.0C00.0C35  0000.0C00.0C35  0000.0c00.0c36  Ethernet1    20        Up

0800.2B16.24EA  0800.2B16.24EA  aa00.0400.2d05  Ethernet0    10        Up

0800.2B14.060E  0800.2B14.060E  aa00.0400.9205  Ethernet0    10        Up

0800.2B14.0528  0800.2B14.0528  aa00.0400.9105  Ethernet0    10        Up

0000.0C00.40AF  0000.0000.0000  --              --           0         Up

0000.0C00.62E6  0000.0C00.62E6  0000.0c00.62e7  Ethernet1    10        Up

AA00.0400.2D05  0800.2B16.24EA  aa00.0400.2d05  Ethernet0    10        Up


Misconceptions:

None


Related commands:

 

redistribute

route-map


© Cisco Systems, Inc. 2001, 2002
World Wide Education







Converted from CHM to HTML with chm2web Pro 2.85 (unicode)