Command:

show ipx servers

Mode:

Router#


Syntax:

show ipx servers [detailed] [network network_number] [unsorted | [sorted [name | net | type]]] [regexp name]


Syntax Description:

unsorted

(Optional) Does not sort entries when displaying IPX servers.

sorted

(Optional) Sorts the display of IPX servers according to the keyword that follows.

name

(Optional) Displays the IPX servers alphabetically by server name.

net

(Optional) Displays the IPX servers numerically by network number.

type

(Optional) Displays the IPX servers numerically by SAP service type. This is the default.

regexp name

(Optional) Displays the IPX servers whose names match the regular expression.

detailed

Comprehensive display including path detail

network

Display Services on a particular network

 

Command Description: 

To list the IPX servers discovered through Service Advertising Protocol (SAP) advertisements, use the show ipx servers EXEC command.


Examples:
 

The following is a sample of output from the show ipx servers command when NLSP is enabled:

Router#show ipx servers    

  

Codes: S - Static, P - Periodic, E - EIGRP, N - NLSP, H - Holddown, + = detail

9 Total IPX Servers

  

Table ordering is based on routing and server info

  

Type Name                      Net  Address          Port Route Hops Itf

N+   4 MERLIN1-VIA-E03         E03E03.0002.0004.0006:0451 4/03  4    Et0

N+   4 merlin                  E03E03.0002.0004.0006:0451 4/03  3    Et0

N+   4 merlin 123456789012345  E03E03.0002.0004.0006:0451 4/03  3    Et0

S    4 WIZARD1--VIA-E0         E0.0002.0004.0006:0451     none  2

N+   4 dtp-15-AB               E002.0002.0004.0006:0451   none  4    Et0

N+   4 dtp-15-ABC              E002.0002.0004.0006:0451   none  4    Et0

N+   4 dtp-15-ABCD             E002.0002.0004.0006:0451   none  4    Et0

N+   4 merlin                  E03E03.0002.0004.0006:0451 4/03  3    Et0

N+   4 dtp-15-ABC              E002.0002.0004.0006:0451   none  4    Et0

  

The table describes the fields shown in the display.

Table: show ipx servers Field Descriptions

Field Description

Codes:

Codes defining how the service was learned.

S - Static

Statically defined service via the ipx sap command.

P - Periodic

Service learned via a SAP update.

E - EIGRP

Service learned via EIGRP.

N - NLSP

Service learned via NLSP.

H- Holddown

Indicates that the entry is in holddown mode and is not reachable.

+ - detail

Indicates that multiple paths to the server exist. Use the show ipx servers detailed EXEC command to display more detailed information about the paths.

Type

Contains codes from Codes field to indicates how service was learned.

Name

Name of server.

Net

Network on which server is located.

Address

Network address of server.

Port

Source socket number.

Route

Ticks/hops (from the routing table).

Hops

Hops (from the SAP protocol).

Itf

Interface through which to reach server.

 

The following example uses a regular expression to display SAP table entries corresponding to a particular group of servers in the accounting department of a company:

Router#show ipx servers regexp ACCT\_SERV.+

  

Codes: S - Static, P - Periodic, E - EIGRP, N - NLSP, H - Holddown, + = detail

9 Total IPX Servers

 
Table ordering is based on routing and server info


 Type  Name            Net  Address        Port  Route  Hops Itf

S 108  ACCT_SERV_1     7001.0000.0000.0001:0001   1/01   2   Et0

S 108  ACCT_SERV_2     7001.0000.0000.0001:0001   1/01   2   Et0

S 108  ACCT_SERV_3     7001.0000.0000.0001:0001   1/01   2   Et0

See the table above for show IPX servers field descriptions.

 

Misconceptions:

 

None


Related commands:
 

None

 


� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)