Command:

show ip slb vservers


Mode:

Router#


Syntax:

show ip slb vservers [name virtserver-name] [detail]

 

Syntax Description:

name (Optional) Displays information about only this virtual server.
virtserver-name (Optional) Name of the virtual server.
detail (Optional) Displays detailed virtual server information.

 

Command Description:

To display information about the virtual servers, use the show ip slb vservers privileged EXEC command.

If no options are specified, the command displays information about all virtual servers.


Example:

The following example shows virtual server data:

Router#show ip slb vservers 
slb vserver prot virtual state conns
---------------------------------------------------------------------
TEST TCP 80.80.254.3:80 OPERATIONAL 1013
TEST21 TCP 80.80.254.3:21 OUTOFSERVICE 0
TEST23 TCP 80.80.254.3:23 OUTOFSERVICE 0

show ip slb vservers Field Descriptions

Field Description
slb vserver Name of the virtual server about which information is being displayed. Information about each virtual server is displayed on a separate line.
prot Protocol being used by the virtual server detailed on a given line.
virtual Virtual IP address of the virtual server detailed on a given line.
state Current state of the virtual server detailed on a given line.
conns Number of connections associated with the virtual server detailed on a given line.


Misconceptions:

None


Related Commands:

None

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)