Command:

show ip route supernets-only


Mode:

Router>


Syntax:

show ip route supernets-only

 

Syntax Description:

This command has no arguments or keywords.

 

Command Description:

To display information about supernets, use the show ip route supernets-only privileged command in EXEC mode.


Example:

The following is sample output from the show ip route supernets-only command. This display shows supernets only; it does not show subnets.

Router#show ip route supernets-only
Codes: I - IGRP derived, R - RIP derived, O - OSPF derived
C - connected, S - static, E - EGP derived, B - BGP derived
i - IS-IS derived, D - EIGRP derived
* - candidate default route, IA - OSPF inter area route
E1 - OSPF external type 1 route, E2 - OSPF external type 2 route
L1 - IS-IS level-1 route, L2 - IS-IS level-2 route
EX - EIGRP external route
Gateway of last resort is not set
B 172.160.0.0 (mask is 255.255.0.0) [20/0] via 172.160.72.30, 0:00:50
B 192.0.0.0 (mask is 255.0.0.0) [20/0] via 172.160.72.24, 0:02:50


Misconceptions:

None.


Related Commands:

None.


© Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)