Command:

show ip pim neighbor

Mode:

Router>


Syntax:

show ip pim neighbor [type number]


Syntax Description:

type

(Optional) Interface type.

number

(Optional) Interface number.


Command Description:

To list the PIM neighbors discovered by the Cisco IOS software, use the show ip pim neighbor EXEC command.

Use this command to determine which routers on the LAN are configured for PIM.


Example:

The following is a sample of output from the show ip pim neighbor command:

Router#show ip pim neighbor

PIM Neighbor Table
Neighbor Address  Interface          Uptime    Expires   Mode
198.92.37.2       FastEthernet0      17:38:16  0:01:25   Dense
198.92.37.33      FastEthernet0      17:33:20  0:01:05   Dense (DR)
198.92.36.131     FastEthernet0/1    17:33:20  0:01:08   Dense (DR)
198.92.36.130     FastEthernet0/1    18:56:06  0:01:04   Dense
10.1.22.9         Tunnel0            19:14:59  0:01:09   Dense
 

The table describes the fields shown in the display.

Table: show ip pim neighbor Field Descriptions

Field Description

Neighbor Address

IP address of the PIM neighbor

Interface

Interface type and number on which the neighbor is reachable

Uptime

How long in hours, minutes, and seconds the entry has been in the PIM neighbor table

Expires

How long in hours, minutes, and seconds until the entry will be removed from the IP multicast routing table

Mode

Mode in which the interface is operating

(DR)

Indicates that this neighbor is a designated router on the LAN


Misconceptions:

None

Related commands:
show ip pim interface

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)