Command:

show ip ospf interface


Mode:

Router>


Syntax:

show ip ospf interface [interface-type interface-number]

 

Syntax Description:

interface-type (Optional) Interface type.
interface-number (Optional) Interface number.

 

Command Description:

To display OSPF-related interface information, use the show ip ospf interface command in EXEC mode.


Example:

The following is sample output of the show ip ospf interface command when Ethernet interface 0 is specified:

Router#show ip ospf interface ethernet 0
Ethernet 0 is up, line protocol is up
Internet Address 192.168.254.202, Mask 255.255.255.0, Area 0.0.0.0
AS 201, Router ID 192.77.99.1, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State OTHER, Priority 1
Designated Router id 192.168.254.10, Interface address 192.168.254.10
Backup Designated router id 192.168.254.28, Interface addr 192.168.254.28
Timer intervals configured, Hello 10, Dead 60, Wait 40, Retransmit 5
Hello due in 0:00:05
Neighbor Count is 8, Adjacent neighbor count is 2
  Adjacent with neighbor 192.168.254.28 (Backup Designated Router)
  Adjacent with neighbor 192.168.254.10 (Designated Router)


Misconceptions:

None.


Related Commands:

None.


© Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)