Command:

show ip ospf flood-list


Mode:

Router>


Syntax:

show ip ospf flood-list interface-type interface-number

 

Syntax Description:

interface-type Interface type over which the LSAs will be flooded.
interface-number Interface number over which the LSAs will be flooded.

 

Command Description:

To display a list of OSPF link-state advertisements (LSAs) waiting to be flooded over an interface, use the show ip ospf flood-list command in EXEC mode. Use this command to observe OSPF packet pacing.


Example:

The following is sample output of the show ip ospf flood-list command:

Router#show ip ospf flood-list ethernet 1 
Interface Ethernet1, Queue length 20
Link state flooding due in 12 msec
Type LS ID  ADV RTR   Seq NO Age Checksum
5 10.2.195.0 192.168.0.163 0x80000009 0 0xFB61
5 10.1.192.0 192.168.0.163 0x80000009 0 0x2938
5 10.2.194.0 192.168.0.163 0x80000009 0 0x757
5 10.1.193.0 192.168.0.163 0x80000009 0 0x1E42
5 10.2.193.0 192.168.0.163 0x80000009 0 0x124D
5 10.1.194.0 192.168.0.163 0x80000009 0 0x134C


Misconceptions:

None.


Related Commands:

None.


© Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)