show ip local policy




show ip local policy


Syntax Description:

This command has no arguments or keywords.


Command Description:

To display the route map used for local policy routing, if any, use the show ip local policy command in EXEC mode.


The following is sample output from the show ip local policy command:

Router#show ip local policy
Local policy routing is enabled, using route map equal
route-map equal, permit, sequence 10
Match clauses:
length 150 200
Set clauses:
ip next-hop
Policy routing matches: 0 packets, 0 bytes
route-map equal, permit, sequence 20
Match clauses:
ip address (access-lists): 101
Set clauses:
ip next-hop
Policy routing matches: 2 packets, 172 bytes



Related Commands:

ip local policy route-map

match ip address

match length

route-map (IP)

set default interface

set interface

set ip default next-hop verify-availability

set ip next-hop

© Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)