Command:

show ip bgp ipv4


Mode:

Router>


Syntax:

show ip bgp ipv4 {multicast | unicast}

 

Syntax Description:

multicast Displays entries for multicast routes.
unicast Displays entries for unicast routes.

 

Command Description:

To display entries in the IP version 4 (IPv4) Border Gateway Protocol (BGP) routing table, use the show ip bgp ipv4 command in EXEC mode.


Example:

The following is sample output from the show ip bgp ipv4 unicast command:

Router#show ip bgp ipv4 unicast
 BGP table version is 4, local router ID is 10.0.40.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 10.10.10.0/24   172.16.10.1              0            0  300 i
*> 10.10.20.0/24   172.16.10.1              0    0  300 i
* 10.20.10.0/24   172.16.10.1              0            0  300 i


The following is sample output from the show ip bgp ipv4 multicast command:
Router#show ip bgp ipv4 multicast BGP table version is 4, local router ID is 10.0.40.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path *> 10.10.10.0/24 172.16.10.1 0 0 300 i *> 10.10.20.0/24 172.16.10.1 0 0 300 i * 10.20.10.0/24 172.16.10.1 0 0 300 i


Misconceptions:

None.


Related Commands:

show ip bgp


© Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)