Command:

show ip bgp filter-list

Mode:

Router>

Syntax:

show ip bgp filter-list access-list-number

Syntax Description:

access-list-number

Number of an autonomous system path access list. It can be a number from 1 to 199.

Command Description:

To display routes that conform to a specified filter list, use the show ip bgp filter-list command in EXEC mode.

Example:

The following is sample output from the show ip bgp filter-list command in privileged EXEC mode:

Router# show ip bgp filter-list 2
BGP table version is 1738, local router ID is 172.16.72.24
Status codes: s suppressed, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* 172.16.0.0 172.16.72.30 0 109 108 ?
* 172.16.1.0 172.16.72.30 0 109 108 ?
* 172.16.11.0 172.16.72.30 0 109 108 ?
* 172.16.14.0 172.16.72.30 0 109 108 ?
* 172.16.15.0 172.16.72.30 0 109 108 ?
* 172.16.16.0 172.16.72.30 0 109 108 ?
* 172.16.17.0 172.16.72.30 0 109 108 ?
* 172.16.18.0 172.16.72.30 0 109 108 ?
* 172.16.19.0 172.16.72.30 0 109 108 ?
* 172.16.24.0 172.16.72.30 0 109 108 ?
* 172.16.29.0 172.16.72.30 0 109 108 ?
* 172.16.30.0 172.16.72.30 0 109 108 ?
* 172.16.33.0 172.16.72.30 0 109 108 ?
* 172.16.35.0 172.16.72.30 0 109 108 ?
* 172.16.36.0 172.16.72.30 0 109 108 ?
* 172.16.37.0 172.16.72.30 0 109 108 ?
* 172.16.38.0 172.16.72.30 0 109 108 ?
* 172.16.39.0 172.16.72.30 0 109 108 ?

Misconceptions:

None.

Related Commands:

None.

---

© Cisco Systems, Inc. 2001, 2002
World Wide Education