Command:  

show crypto map


Mode:

Router#
Router>


Syntax:

show crypto map [ interfaceinterface | tagmap-name]

 Syntax Description:

interface interface

(Optional) Displays only the crypto map set applied to the specified interface.

tag map-name

(Optional) Displays only the crypto map set with the specified map-name.

 

Command Description:

To view the crypto map configuration, use the show crypto mapcommand in EXEC mode.


Example:

The following is sample output for the show crypto mapcommand:

Router# show crypto map

Crypto Map "crypmap" 1 ipsec-isakmp

Peer = 172.1.1.1

ISAKMP Profile: vpn1

Extended IP access list 101

access-list 101 permit ip 10.1.0.0 0.0.255.255 10.2.0.0 0.0.255.255

access-list 101 permit ip host 192.168.1.1 host 10.2.1.1

access-list 101 permit ip 10.3.0.0 0.0.255.255 10.2.0.0 0.0.255.255

Current peer: 172.16.1.1

Security association lifetime: 4608000 kilobytes/3600 seconds

PFS (Y/N): N

Transform sets={

vpn1,

The following configuration was in effect when the above show crypto mapcommand was issued:

crypto map crypmap 1 ipsec-isakmp

set peer 172.16.1.1

set transform-set vpn1

set isakmp-profile vpn1

match address 101


Misconceptions:

None


Related commands:

 

crypto map


© Cisco Systems, Inc. 2001, 2002
World Wide Education









Converted from CHM to HTML with chm2web Pro 2.85 (unicode)