Command:

show clns neighbors


Mode:

Router>


Syntax:

show clns area-tag neighbors [type number] [area] [detail]

 

Syntax Description:

area-tag Required for multiarea IS-IS configuration. Optional for conventional IS-IS configuration. It is the meaningful name for a routing process. This name must be unique among all IP or CLNS router processes for a given router. If an area tag is not specified, a null tag is assumed and the process is referenced with a null tag. If an area tag is specified, output is limited to the specified area.
type (Optional) Interface type.
number (Optional) Interface number.
area (Optional) When specified, the CLNS multiarea adjacencies are displayed.
detail (Optional) When specified, the area addresses advertised by the neighbor in the hello messages is displayed. Otherwise, a summary display is provided.

 

Command Description:

To display both ES and IS neighbors, use the show clns neighbors command in EXEC mode.


Example:

The following is sample output from the show clns neighbors command. This display is a composite of the show clns es-neighbor and show clns is-neighbor commands.

Router# show clns neighbors
System Id          SNPA            Interface    State  Holdtime  Type Protocol
0000.0000.0007     aa00.0400.6408  Ethernet0    Init   277       IS   ES-IS
0000.0C00.0C35     0000.0c00.0c36  Ethernet1    Up     91        L1   IS-IS
0800.2B16.24EA     aa00.0400.2d05  Ethernet0    Up     29        L1L2 IS-IS
0800.2B14.060E     aa00.0400.9205  Ethernet0    Up     1698      ES   ES-IS
0000.0C00.3E51     *HDLC*          Serial1      Up     28        L2   IS-IS
0000.0C00.62E6     0000.0c00.62e7  Ethernet1    Up     22        L1   IS-IS
0A00.0400.2D05     aa00.0400.2d05  Ethernet0    Init   24        IS   ES-IS


Misconceptions:

None.


Related Commands:

clear clns neighbors


© Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)