Command:

show clns interface


Mode:

Router>


Syntax:

show clns interface [type number]

 

Syntax Description:

type (Optional) Interface type.
number (Optional) Interface number.

 

Command Description:

To list the CLNS-specific information about each interface, use the show clns interface command in EXEC mode.


Example:

The following is sample output from the show clns interface command that includes information for Token Ring and serial interfaces:

Router# show clns interface
TokenRing 0 is administratively down, line protocol is down
  CLNS protocol processing disabled
TokenRing 1 is up, line protocol is up
  Checksums enabled, MTU 4461, Encapsulation SNAP
  ERPDUs enabled, min. interval 10 msec.
  RDPDUs enabled, min. interval 100 msec., Addr Mask enabled
  Congestion Experienced bit set at 4 packets
  CLNS fast switching disabled
  DEC compatibility mode OFF for this interface
  Next ESH/ISH in 18 seconds
  Routing Protocol: ISO IGRP
      Routing Domain/Area: <39.0003> <0020>
Serial 2 is up, line protocol is up
  Checksums enabled, MTU 1497, Encapsulation HDLC
ERPDUs enabled, min. interval 10 msec.
     RDPDUs enabled, min. interval 100 msec., Addr Mask enabled
     Congestion Experienced bit set at 4 packets
     CLNS fast switching enabled
     DEC compatibility mode OFF for this interface
     CLNS cluster alias enabled on this interface
     Next ESH/ISH in 48 seconds
  Routing Protocol: IS-IS
       Circuit Type: level-1-2
       Level-1 Metric: 10, Priority: 64, Circuit ID: 0000.0C00.2D55.0A
       Number of active level-1 adjacencies: 0
       Level-2 Metric: 10, Priority: 64, Circuit ID: 0000.0000.0000.00
       Number of active level-2 adjacencies: 0
       Next IS-IS LAN Level-1 hello in 3 seconds
       Next IS-IS LAN Level-2 hello in 3 seconds


Misconceptions:

None.


Related Commands:

None.


© Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)