Command:

show authentication

Mode:

Switch> (enable)


Syntax:

show authentication


Syntax Description:

This command has no arguments or keywords.


Command Description:

Use the show authentication command to display authentication information.


Example:

This example shows how to display authentication information:

Console>show authentication

                       Console Session   Telnet Session   Http Session

Login Authentication:

---------------------  ----------------  ---------------  -----------

tacacs                 disabled          disabled          disabled
radius                 disabled          disabled          disabled
kerberos               disabled          disabled          disabled
local                  enabled(primary)  enabled(primary)  enabled(primary)
attempt limit          3                 3                 -
lockout timeout (sec)  230 seconds       120 seconds       120 seconds

Enable Authentication: Console Session   Telnet Session    Http Session
---------------------- ----------------- ----------------  ----------------
tacacs                 disabled          disabled          disabled
radius                 disabled          disabled          disabled
kerberos               disabled          disabled          disabled
local                  enabled(primary)  enabled(primary)  enabled(primary)
attempt limit          3                 3                 -
lockout timeout (sec)  disabled          600 seconds       600 seconds
(*) primary
Console>

 


Misconceptions:
None

Related Commands:
set authentication login

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)