Command:

set tag


Mode:

Router(config-route-map)#


Syntax:

set tag tag-value
no set tagtag-value

 

Syntax Description:

tag-value Name for the tag. Integer from 0 to 4294967295.

 

Command Description:

To set a tag value of the destination routing protocol, use the set tag command in route-map configuration mode. To delete the entry, use the no form of this command.

If not specified, the default action is to forward the tag in the source routing protocol onto the new destination protocol.

Use the route-map (IP) global configuration command with the match and set route-map configuration commands to define the conditions for redistributing routes from one routing protocol into another, or for policy routing. Each route-map command has an associated list of match and set commands. The match commands specify the match criteria--the conditions under which redistribution or policy routing is allowed for the current route-map command. The set commands specify the set actions--the particular redistribution or policy routing actions to perform if the criteria enforced by the match commands are met. The no route-map command deletes the route map.

The set route-map configuration commands specify the redistribution set actions to be performed when all of the match criteria of a route map are met.


Example:

The following example sets the tag value of the destination routing protocol to 5:

Router(config)# route-map tag
Router(config-route-map)# set tag 5


Misconceptions:

None


Related Commands:

match as-path
match community
match interface
match ip address
match ip next-hop
match ip route-source
match metric
match route-type
match tag
route-map
set community
set metric
set weight

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)