Command:

queue-list interface

Mode:

Router(config)#

Syntax:

queue-list list-number interface interface-type interface-number queue-number

no queue-list list-number interface interface-type interface-number queue-number

Syntax Description:

list-number

Number of the queue list. Any number from 1 to 16.

interface-type

Name of the interface

interface-number

Number of the interface

queue-number

Number of the queue. Any number from 1 to 16.


Command Description:

To establish queueing priorities on packets entering on an interface, use the queue-list interface global configuration command. To remove an entry from the list, use the no form of this command.

When you use multiple rules, remember that the system reads the queue-list commands in order of appearance. When classifying a packet, the system searches the list of rules specified by queue-list commands for a matching protocol or interface type. When a match is found, the system assigns the packet to the appropriate queue. The list is searched in the order it is specified, and the first matching rule terminates the search.


Example:

In the following example, queue list 4 establishes queueing priorities for packets entering on interface tunnel 3. The queue number assigned is 10.

Router(config)#queue-list 4 interface tunnel 3 10

 

Misconceptions:

None

Related Commands:
custom-queue-list
queue-list default
queue-list queue byte-count
queue-list queue limit
show queueing

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)