Command:  

queue-limit


Mode:

Router(config-pmap)#


Syntax:

queue-limit number-of-packets

no queue-limit number-of-packets

Syntax Description

number-of-packets

A number in the range from 1 to 64 specifying the maximum number of packets that the queue for this class can accumulate.


Command Description:

To specify or modify the maximum number of packets the queue can hold for a class policy configured in a policy map, use the queue-limit policy-map class configuration command. To remove the queue packet limit from a class, use the no form of this command.

Example:

The following example configures a policy map called policy11 to contain policy for a class called acl203. Policy for this class is set so that the queue reserved for it has a maximum packet limit of 40.

Router(config)#policy-map policy11

Router(config-pmap)#class acl203

Router(config-pmap)#bandwidth 2000

Router(config-pmap)#queue-limit 40


Misconceptions:

None


Related commands:

custom-queue-list
show queue
show queueing

� Cisco Systems, Inc. 2001, 2002
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)