Command:

pri-group


Mode:

Router(config-controller)#

Syntax:
 

pri-group [timeslots range]

no pri-group


Syntax Description:

timeslots range

(Optional) Specifies a single range of values from 1 to 23 for channelized T1 and from 1 to 31 for channelized E1.


Command Description:

To specify ISDN Primary Rate Interface (PRI) on a channelized T1 or channelized E1 controller, use the pri-group controller configuration command. Use the no form of this command to remove the ISDN PRI configuration. 

Example:

The following example configures ISDN PRI on all timeslots of the T1 controller in slot 1 port 0 on a Cisco 7200 series router:

Router(config)#isdn switch-type primary-4ess
Router(config)#controllers t1 1/0
 Router(config-controller)#framing esf
 Router(config-controller)#linecode b8zs
 Router(config-controller)#pri-group timeslots 1-24

The following example configures E1 controller 0 on a Cisco 4000 series router for ISDN PRI on all timeslots:

Router(config)#isdn switch-type primary-net5
Router(config)#controllers e1 0/0
 Router(config-controller)#framing esf
 Router(config-controller)#linecode b8zs
 Router(config-controller)#pri-group timeslots 1-31


Misconceptions:

None

Related Commands:
framing
isdn switch-type
linecode

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)