Command:

pppoe-client dial-pool-number


Mode:

Router(config-if)#


Syntax:

pppoe-client dial-pool-number number

 

Syntax Description:

number Specifies the dialer interface to use for cloning.

 

Command Description:

Configures the PPPoE client and specifies the dialer interface to use for cloning.


Example:

The following is the show running-config from a router configured with :

Router(config-if)# pppoe-client dial-pool-number 1
vpdn enable
vpdn-group 1
 request-dialin
  protocol pppoe
!
interface ethernet1/1
 pppoe-client dial-pool-number 1
 pppoe-client dial-pool-number 2
!
interface dialer 1
 ip address negotiated
 dialer pool 1
 dialer-group 1
!
interface dialer 2
 ip address negotiated
 dialer pool 2
 dialer-group 2


Misconceptions:

None.


Related Commands:

None.


© Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)