Command:

password

Mode:

Router(config-line)#


Syntax:

password password

no password password

 

Syntax Description:

password

The password to assign to the line


Command Description:

To specify a password on a line, use the password line configuration command. Use the no form of this command to remove the password.


Examples:

The following example sets a password for virtual terminal sessions 0 through 4.

Router(config)#line vty 0 4 
Router(config-line)#password 12345

 

The following example will set a password of 1234 on console 0. 

Router(config)#line console 0
  Router(config-line)#password 1234
  Router(config-line)#^Z
  Router#

 

Misconceptions:

 

None


Related Commands:

 

None

 


� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)