Command:

network (RIP, RIPv2, and IGRP)


Mode:

Router(config-router)#

Syntax:

network network-address

Syntax Description:

This command has no arguments or keywords.

Command Description:

To specify a list of networks for a Routing Information Protocol (RIP), RIP version 2, or Interior Gateway Routing Protocol (IGRP) routing process, use this form of the network router configuration command. To remove an entry, use the no form of this command.

Example:
Router(config)#router rip
Router(config-router)#network 172.16.0.0

Misconceptions:
None

Related Commands:
router rip
router igrp
show ip route

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)