Command:

network (EIGRP)


Mode:

Router(config-router)#

Syntax:

network network-number [network-mask]

no network network-number [network-mask]

Syntax Description:

network-number IP address of the directly connected networks.
network-mask (Optional) Network mask.

 

Command Description:

To specify a list of networks for an EIGRP routing process, use this form of the network router configuration command. To remove an entry, use the no form of this command.

Example:

The following example configures a router for EIGRP and assigns autonomous system number 109. The network command indicates the network directly connected to the router.

Router(config)#router eigrp 109
Router(config-router)#network 172.16.0.0 0.0.255.255

Misconceptions:
None

Related Commands:
router eigrp
show ip route

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)