Command:

netbios-name-server


Mode:

Router(dhcp-config)#

Syntax:

netbios-name-server {hostname | address} [hostname2 | address2 ... Hostname8 | address8]

no netbios-name-server

Syntax Description:

 

address(n) The IP address(es) of the netbios name server(s).
hostname The name of the netbios-name-server.

 

Command Description:

This command specifies the IP address of a netbios name-server that is available to a DHCP client. One IP address is required; however, you can specify up to eight IP addresses in one command line. To remove the NetBIOS name server list, use the no form of this command.

Example:

The following example will define a two netbios name server in a DHCP pool named "house". The first is at 192.168.0.10 and the second is at 10.0.0.20.

Router(config)#ip dhcp pool house
Router(dhcp-config)#netbios-name-server 192.168.0.10 10.0.0.20

Misconceptions:
None

Related Commands:
ip dhcp pool
dns-server
domain-name

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)