Command:

neighbor soft-reconfiguration


Mode:

Router(config-router)#


Syntax:
 

neighbor {ip-address | peer-group-name} soft-reconfiguration [inbound]

no neighbor {ip-address | peer-group-name} soft-reconfiguration [inbound]

 

Syntax Description:

 

ip-address

IP address of the BGP-speaking neighbor

peer-group-name

Name of a BGP peer group

inbound

(Optional) Indicates that the update to be stored is an incoming update.

 

Command Description:

To configure the Cisco IOS software to start storing updates, use the neighbor soft-reconfiguration router configuration command. To not store received updates, use the no form of this command.

Example:

The following example enables inbound soft reconfiguration for the neighbor 131.108.1.1. All the updates received from this neighbor will be stored unmodified, regardless of the inbound policy. When inbound soft reconfiguration is done later, the stored information will be used to generate a new set of inbound updates.

Router (config)#router bgp 100

Router (config-router)#neighbor 131.108.1.1 remote-as 200

Router (config-router)#neighbor 131.108.1.1 soft-reconfiguration inbound

Misconceptions:
None

Related Commands:
neighbor remote-as
clear ip bgp

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)