Command:

neighbor advertisement-interval


Mode:

 

Router(config-router)#

Router(config-router-af)#

 

Syntax:

neighbor {ip-address | peer-group-name} advertisement-interval seconds

no neighbor {ip-address | peer-group-name} advertisement-interval seconds

Syntax Description:
ip-address Neighbor's IP address
peer-group-name Name of a BGP peer group
seconds Time (in seconds) is specified by an integer from 0 to 600.

Command Description:

To set the minimum interval between the sending of BGP routing updates, use the neighbor advertisement-interval command in address family or router configuration mode. To remove an entry, use the no form of this command.


Example:

The following router configuration mode example sets the minimum time between sending BGP routing updates to 240 seconds:

Router(config)#router bgp 5 
Router(config-router)#neighbor 172.25.21.5 advertisement-interval  240
 

The following address family configuration mode example sets the minimum time between sending BGP routing updates to 10 seconds:

Router(config)#router bgp  5
Router(config-router)#address-family ipv4 unicast
Router(config-router-af)#neighbor  4.4.4.4  advertisement-interval 10

Misconceptions:
None

Related Commands:
address-family ipv4

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)