Command:

modem autoconfigure discovery


Mode:

Router(config-line)#

Syntax:

modem autoconfigure discovery 

no modem autoconfigure


Syntax Description:

This command has no arguments or keywords.


Command Description:

To configure a line to discover what kind of modem is connected to the router and to configure that modem automatically, use the modem autoconfigure discovery line configuration command. Use the no form of this command to disable this feature. The modem is identified each time the line is reset. If a modem cannot be detected, the line continues retrying for 10 seconds. When the modem type is determined, this information remains stored until the modem is recycled or disconnected. Discovery mode is much slower than configuring a line directly.


Example:

The following example discovers what kind of modem is attached to the router:

Router(config-line)#modem autoconfigure discovery

Misconceptions:
None

Related Commands:
modem autoconfigure type
speed
transport input
transport output
login
password
flowcontrol
stopbits

� Cisco Systems, Inc. 2001, 2002, 2003
World Wide Education

Converted from CHM to HTML with chm2web Pro 2.85 (unicode)